1100 – Configuring PRM-32, PRM-35 and EST-P1 projectors for 3D use
Applicable to:
EST P1
PRM 32
PRM 35
Windows
Minimum PC requirements
System memory: 1 GB system memory
Disk space: 100 MB free disk space
Graphics card: Quad Core graphics card
Operating system: Dependant on the content being used
Configuring Promethean projectors for 3D
1. Connect your computer to the projector using a VGA or HDMI cable and power on the projector using the remote control
2. Press the Menu button on the remote control to open the projector menu
3. Press ◄► on the remote control to move to the Installation II menu
4. Press ▲▼ to move to the Advanced menu and press Enter or ►
5. Press ▼ to move to the 3D menu option and press Enter or ►
6. Select the 3D option and use ◄► to select DLP-Link
3D Sync Invert
DLP Link technology is used to connect the 3D glasses to the projector. This means that the 3D glasses automatically connect to the projector without human intervention.
Stereoscopic 3D uses two images to create the 3D effect, one for the right eye and one for the left. When the 3D glasses are connected, they have a 50/50 chance of connecting each eye to the correct image on the screen.
Should the content not be displayed correctly as the 3D glasses have not connected to the projector correctly, you should set the 3D Sync Invert option to On using the ► button on your remote control.
Related Articles
1098 – Enabling 3D on a computer for use with PRM-32, PRM-35 and EST-P1
Applicable to: EST P1 PRM 32 PRM 35 Windows Minimum hardware requirements Hardware requirements are 3D content specific; please refer to your 3D content provider for more details. Only Quad core graphics cards can be used with the PRM-32, PRM-35 and ...1101 – Enabling 3D on a computer for use with PRM-45 and UST
Applicable to: PRM 45 A UST P1 UST P2 Windows Minimum hardware requirements Hardware requirements are 3D content specific, please refer to you 3D content provider for more details. Most current graphics cards will output 3D. The only minimum ...1277 – How can I adjust the focus of my PRM-25 or PRM-35 projector?
Applicable to: PRM 25 PRM 35 Your projector’s image focus can be adjusted via the built in focus wheel underneath the lens to the front of the unit. Scrolling the wheel left or right will adjust the focus accordingly. Please see the image below to ...1565 – Getting Started with your ActivConnect
Applicable to: ActivConnect G ActivConnect OPS G To ensure that you can instantly get started, your ActivConnect is preloaded with educational apps and tools to complement your lessons. The following apps and tools are featured on your ActivConnect ...1270 – How do I set up my PRM-30 image?
Applicable to: PRM 30 One of the added features of the PRM-30 projector is that it natively supports widescreen resolution laptops for projecting a widescreen image onto a widescreen ActivBoard (87″/88″/95″ ActivBoard). The projector also supports a ...