1101 – Enabling 3D on a computer for use with PRM-45 and UST

1101 – Enabling 3D on a computer for use with PRM-45 and UST

Applicable to:

  • PRM 45 A

    PRM 45 A

  • UST P1

    UST P1

  • UST P2

    UST P2

  • Windows

    Windows

Minimum hardware requirements

Hardware requirements are 3D content specific, please refer to you 3D content provider for more details.

Most current graphics cards will output 3D. The only minimum requirement is that it must be able to output at 120 Hertz.

If you are unsure whether your device is capable of outputting 3D, please check with your device’s manufacturer.

NB: your computer must be connected to the projector to perform these steps.

Getting your computer 3D ready

1. Right click on your desktop and select Screen Resolution.
User-added image
2. Select Advanced Settings.

User-added image
3. Select the Monitor tab, and select a Screen refresh rate of 120 Hertz. Click Apply.

User-added image
If this option is unavailable, reduce the resolution of your display and repeat the above steps.

Enabling 3D on your NVIDIA graphics card

NB: the instructions below are for an NVIDIA Quadro graphics card, but the set up process may be similar for other quad core graphics cards.

1. Right click on the desktop and select NVIDIA Control Panel.

User-added image
2. Select Manage 3D Settings under the 3D Settings header in the left hand menu.

User-added image
3. Select 3D OpenGL Stereo from the drop down menu.

User-added image
4. Use the drop down menu next to Stereo – Display mode and select Generic active stereo.

User-added image
5. Scroll down to Stereo – Enable and from the drop down menu select On. Click Apply to confirm.

User-added image
6. Select Set up stereoscopic 3D under Stereoscopic 3D in the left hand menu of the screen and tick the Enable stereoscopic 3D box. Click Apply to confirm.

User-added image

    • Related Articles

    • 1098 – Enabling 3D on a computer for use with PRM-32, PRM-35 and EST-P1

      Applicable to: EST P1 PRM 32 PRM 35 Windows Minimum hardware requirements Hardware requirements are 3D content specific; please refer to your 3D content provider for more details. Only Quad core graphics cards can be used with the PRM-32, PRM-35 and ...
    • 1055 – How do I set up my PRM-45 or UST image?

      Applicable to: PRM 45 A UST P1 UST P2 The PRM-45 and UST projectors’ native resolution is 1280 x 800 (16:10 aspect ratio). As such, it supports widescreen resolution laptops for use with a widescreen (87”/88”/95”) ActivBoard. The projector also ...
    • 1100 – Configuring PRM-32, PRM-35 and EST-P1 projectors for 3D use

      Applicable to: EST P1 PRM 32 PRM 35 Windows Minimum PC requirements System memory: 1 GB system memory Disk space: 100 MB free disk space Graphics card: Quad Core graphics card Operating system: Dependant on the content being used Configuring ...
    • 1565 – Getting Started with your ActivConnect

      Applicable to: ActivConnect G ActivConnect OPS G To ensure that you can instantly get started, your ActivConnect is preloaded with educational apps and tools to complement your lessons. The following apps and tools are featured on your ActivConnect ...
    • 1779 – My Windows 10 computer crashes when I connect it to my ActivBoard

      Applicable to: ActivBoard 100 ActivBoard 300 Pro ActivBoard 300 Standard ActivBoard 500 Pro Windows 1st Generation ActivBoard 2nd Generation ActivBoard If you have recently updated your Windows 10 computer (build 1903 or later) and you start ...