1165 – How can I purchase spares for my LCD projector?

1165 – How can I purchase spares for my LCD projector?

Applicable to:

  • Legacy Projectors

    Legacy Projectors

  • PRM 10

    PRM 10

  • PRM 20

    PRM 20

  • PRM 30

    PRM 30

Promethean no longer sells spare lamps, remote controls or filters for LCD projectors.

The codes from the table below can be used to search online for spare parts.
User-added image

    • Related Articles

    • 1228 – How much power does my projector use?

      Applicable to: DLP Projectors LCD Projectors SSI Projectors Please refer to the table below for power consumption information. Projector model Full use Standby* PRM-25 240W < 1W PRM-30 317W < 0.8W PRM-32 240W < 1W PRM-35 240W < 1W PRM-45 240W < 1W ...
    • 1333 – How do I remove my PRM-30 projector?

      Applicable to: PRM 30 The projector cabling will first need to be disconnected. The cabling is covered with a fascia, and this will first need to be removed. Once removed, disconnect any cables connected to the projector. The next step is to unfasten ...
    • 1295 – How many hours has my projector lamp been running?

      Applicable to: DLP Projectors LCD Projectors LCD projectors (PRM-10, PRM-20 and PRM-30) With a working lamp inserted and with the projector switched on, press and hold the ON-OFF button for approximately 30 seconds. After this time, you will see a ...
    • 1332 – How do I remove my PRM-25 projector from my version 3 system?

      Applicable to: ActivBoard Adjustable System ActivBoard Fixed System PRM 25 Please switch off the projector, unscrew and disconnect the cables at the back.   Remove the thumbscrew. Allow the projector-mounting arm to slowly unhinge. Now carefully lift ...
    • 1290 – DLP Projector Care Guidelines

      Applicable to: EST P1 PRM 25 PRM 32 PRM 35 PRM 45 A UST P1 UST P2 Recommended Operation Turn the projector on 5 minutes prior to intended use. Turn the projector to Standby when not using it for a period of time greater than 30 minutes. Note: ...