1270 – How do I set up my PRM-30 image?

1270 – How do I set up my PRM-30 image?

Applicable to:

  • PRM 30

    PRM 30

One of the added features of the PRM-30 projector is that it natively supports widescreen resolution laptops for projecting a widescreen image onto a widescreen ActivBoard (87″/88″/95″ ActivBoard). The projector also supports a 4:3 aspect ratio ActivBoards (64″/78″), and therefore can be used on all ActivBoards. This document identifies the correct aspect ratio for each ActivBoard, and the different variants of screen resolution that can be used natively with the projector, as well as information on how to adjust your projector to display the correct image.

List of ActivBoards and aspect ratios

  • 95″ – 16:9 (Widescreen)
  • 87″ and 88″ – 16:10 (Widescreen)
  • 78″ – 4:3
  • 64″ – 4:3
4:3 Aspect Ratio16:9 Aspect Ratio16:10 Aspect Ratio
320 x 240852 x 480320 x 200
640 x 4801280 x 720640 x 400
800 x 6001365 x 7681280 x 800
1024 x 7681600 x 9001440 x 900
1152 x 8641920 x 10801680 x 1050
1280 x 960
1400 x 1050
1600 x 1200
1920 x 1200
2048 x 1536
2560 x 1600
3200 x 2400
4000 x 3000
6400 x 4800
7680 x 4800

Before starting please ensure your computer is set to one of the resolutions listed above in accordance with your ActivBoard size.This article will show how to set up the image correctly on all variants of ActivBoard (64″/78″/87″/88″/95″). We also assume that the projector has been installed correctly and has been tested by the system installer.

When using an 87″/88″/95″ ActivBoard

  • Press the Menu button on the remote control.
  • Using the down arrow key navigate to the Settings screen.
  • Now press the right arrow key so that Screen Aspect is highlighted.
  • Press Select.
  • Press the up arrow key to toggle between 16:9 – 16:10 depending on your ActivBoard size.
  • Set the screen resolution of the laptop to 16:9 for a 95″ ActivBoard or 16:10 for an 87″/88″ ActivBoard.

When using a 64″/ 78″ ActivBoard

  • Press the Menu button on the remote control.
  • Using the down arrow key navigate to the Settings screen.
  • Now press the right arrow key so that Screen Aspect is highlighted.
  • Press Select.
  • Press the up arrow key to change the setting to the 4:3 aspect ratio.
 

    • Related Articles

    • 1271 – How do I set up my PRM-25 image?

      Applicable to: PRM 25 One of the added features of the PRM-25 projector is that natively supports widescreen resolution laptops for projecting a widescreen image onto a widescreen ActivBoard (87″/88″/95″ ActivBoard). The projector also supports a 4:3 ...

    • 1268 – How do I set up my PRM-32 image?

      Applicable to: PRM 32 The PRM-32 projector supports a 4:3 aspect ratio, and can be used on 78″ ActivBoards. This document identifies the correct aspect ratio for each ActivBoard, and the different variants of screen resolution that can be used ...

    • 1267 – How do I set up my PRM-35 image?

      Applicable to: PRM 35 The PRM-35 projector natively supports widescreen resolution laptops for projecting a widescreen image onto a widescreen (87”/95”) ActivBoard. This projector also supports ActivBoards with a 4:3 aspect ratio (64”/78”) and can ...

    • 1055 – How do I set up my PRM-45 or UST image?

      Applicable to: PRM 45 A UST P1 UST P2 The PRM-45 and UST projectors’ native resolution is 1280 x 800 (16:10 aspect ratio). As such, it supports widescreen resolution laptops for use with a widescreen (87”/88”/95”) ActivBoard. The projector also ...

    • 1098 – Enabling 3D on a computer for use with PRM-32, PRM-35 and EST-P1

      Applicable to: EST P1 PRM 32 PRM 35 Windows Minimum hardware requirements Hardware requirements are 3D content specific; please refer to your 3D content provider for more details. Only Quad core graphics cards can be used with the PRM-32, PRM-35 and ...