1332 – How do I remove my PRM-25 projector from my version 3 system?

1332 – How do I remove my PRM-25 projector from my version 3 system?

Applicable to:

  • ActivBoard Adjustable System

    ActivBoard Adjustable System

  • ActivBoard Fixed System

    ActivBoard Fixed System

  • PRM 25

    PRM 25

Please switch off the projector, unscrew and disconnect the cables at the back.
User-added image User-added image

Remove the thumbscrew.
User-added image

Allow the projector-mounting arm to slowly unhinge.
User-added image

Now carefully lift the projector and attached mounting from the horizontal arm, leaving the arm stationary and still attached to the system.
User-added image

The projector should be fully detached from the system. For a warranty replacement, you will need to remove the screws which fasten the mounting bracket to the projector. Do not return any fixings with the faulty projector as they will be required to fit the replacement to the system.
User-added image

    • Related Articles

    • 1333 – How do I remove my PRM-30 projector?

      Applicable to: PRM 30 The projector cabling will first need to be disconnected. The cabling is covered with a fascia, and this will first need to be removed. Once removed, disconnect any cables connected to the projector. The next step is to unfasten ...
    • 1290 – DLP Projector Care Guidelines

      Applicable to: EST P1 PRM 25 PRM 32 PRM 35 PRM 45 A UST P1 UST P2 Recommended Operation Turn the projector on 5 minutes prior to intended use. Turn the projector to Standby when not using it for a period of time greater than 30 minutes. Note: ...
    • 1279 – How can I adjust the focus of my PRM-30 projector?

      Applicable to: PRM 30 Your projector’s focus can be adjusted via the built-in focus wheel to the bottom of the chassis. Scrolling the wheel left or right will alter the focus accordingly. Please see the image below.
    • 1270 – How do I set up my PRM-30 image?

      Applicable to: PRM 30 One of the added features of the PRM-30 projector is that it natively supports widescreen resolution laptops for projecting a widescreen image onto a widescreen ActivBoard (87″/88″/95″ ActivBoard). The projector also supports a ...
    • 1271 – How do I set up my PRM-25 image?

      Applicable to: PRM 25 One of the added features of the PRM-25 projector is that natively supports widescreen resolution laptops for projecting a widescreen image onto a widescreen ActivBoard (87″/88″/95″ ActivBoard). The projector also supports a 4:3 ...