1601 – EST-P1 LED Error Code Messages
Applicable to:
EST P1
| Error Code Messages | Warning LED | Lamp LED | Power LED |
| Power on | Off | Off | Blue |
| Power off | Off | Off | Orange |
| Lamp fail | Off | On | Off |
| Cooling | Off | Off | Flashing |
| Over temperature | On | Off | Off |
| T1 error | Off | 1 blink | 3 blinks |
| T2 error | Off | 2 blinks | 3 blinks |
| Thermal break sensor error | Off | Off | 4 blinks |
| Lamp strike fail | Off | Off | 5 blinks |
| Ballast fail | Off | 2 blinks | 5 blinks |
| Ballast over temperature in start | Off | 3 blinks | 5 blinks |
| Ballast over temperature | Off | 4 blinks | 5 blinks |
| Burner fan error | Off | 1 blink | 6 blinks |
| Lamp fan error | Off | 2 blinks | 6 blinks |
| Lamp door open | Off | Off | 7 blinks |
| DMD error | Off | Off | 8 blinks |
| Color wheel error | Off | Off | 9 blinks |
| Ballast communication error | Off | 1 blink | 10 blinks |
In the event of an error, please disconnect the AC power cord and wait for one minute before restarting the projector. If the POWER or LAMP LEDs are still blinking or the WARNING LED is lit, contact Promethean Technical Customer Support.
Related Articles
1602 – PRM-25 LED Error Code Messages
Applicable to: PRM 25 Error Code Messages Power LED Ready LED Over temperature 3 blinks Off G794 fail 4 blinks 4 blinks T1 fail 4 blinks 5 blinks Lamp error 5 blinks Off Ballast over temperature 5 blinks 1 blink Ballast short circuit in output ...1600 – UST LED Error Code Messages
Applicable to: UST P1 UST P2 Error Code Messages Temp LED Lamp LED Power LED Power On Off Off Green Power Off Off Off Green Cooling Off Off Flashing Over temperature On Off Off Thermal break sensor error Off Off 4 blinks Lamp error Off On Off Fan 1 ...1598 – PRM-45 LED Error Code Messages
Applicable to: PRM 45 A Error Code Messages Power LED Lamp LED Temp LED System initial Flash Off Off Ready to power on (Standby) On Off Off System power on Flash Off Off Lamp lit, system stable On Off Off Cooling Flashing Off Off Over temperature Off ...1599 – PRM-35 and PRM-32 LED Error Code Messages
Applicable to: PRM 32 PRM 35 Error Code Messages Temp LED Power LED Lamp LED Ready to Power on (Standby) Off On Off System Power on Off Blinks Off Cooling Off Blinks Off Over temperature On Off Off Thermal break sensor error Off 4 blinks Off Lamp ...1082 – How do I align my EST-P1 projector?
Applicable to: ActivBoard Adjustable System ActivBoard Fixed System ActivBoard Mount System EST P1 This article is only relevant to Promethean ActivBoard Systems with the projector plate below. NB:If your projector plate looks different, please ...